[PATCH] tcm_loop: Fixup tag handling

[Hannes Reinecke]

The SCSI command tag is set to the tag assigned from the block
layer, not the SCSI-II tag message. So we need to convert
it into the correct SCSI-II tag message based on the
device flags, not the tag value itself.

Signed-off-by: Hannes Reinecke <***@suse.de>
---
drivers/target/loopback/tcm_loop.c | 23 ++++++++---------------
1 file changed, 8 insertions(+), 15 deletions(-)

diff --git a/drivers/target/loopback/tcm_loop.c b/drivers/target/loopback/tcm_loop.c
index 340de9d..c2a9370 100644
--- a/drivers/target/loopback/tcm_loop.c
+++ b/drivers/target/loopback/tcm_loop.c
@@ -153,18 +153,11 @@ static int tcm_loop_change_queue_type(struct scsi_device *sdev, int tag)
/*
* Locate the SAM Task Attr from struct scsi_cmnd *
*/
-static int tcm_loop_sam_attr(struct scsi_cmnd *sc)
-{
- if (sc->device->tagged_supported) {
- switch (sc->tag) {
- case HEAD_OF_QUEUE_TAG:
- return MSG_HEAD_TAG;
- case ORDERED_QUEUE_TAG:
- return MSG_ORDERED_TAG;
- default:
- break;
- }
- }
+static int tcm_loop_sam_attr(struct scsi_cmnd *sc, int tag)
+{
+ if (sc->device->tagged_supported &&
+ sc->device->ordered_tags && tag >= 0)
+ return MSG_ORDERED_TAG;

return MSG_SIMPLE_TAG;
}
@@ -227,7 +220,7 @@ static void tcm_loop_submission_work(struct work_struct *work)

rc = target_submit_cmd_map_sgls(se_cmd, tl_nexus->se_sess, sc->cmnd,
&tl_cmd->tl_sense_buf[0], tl_cmd->sc->device->lun,
- transfer_length, tcm_loop_sam_attr(sc),
+ transfer_length, tcm_loop_sam_attr(sc, tl_cmd->sc_cmd_tag),
sc->sc_data_direction, 0,
scsi_sglist(sc), scsi_sg_count(sc),
sgl_bidi, sgl_bidi_count,
@@ -266,7 +259,7 @@ static int tcm_loop_queuecommand(struct Scsi_Host *sh, struct scsi_cmnd *sc)
}

tl_cmd->sc = sc;
- tl_cmd->sc_cmd_tag = sc->tag;
+ tl_cmd->sc_cmd_tag = sc->request->tag;
INIT_WORK(&tl_cmd->work, tcm_loop_submission_work);
queue_work(tcm_loop_workqueue, &tl_cmd->work);
return 0;
@@ -370,7 +363,7 @@ static int tcm_loop_abort_task(struct scsi_cmnd *sc)
*/
tl_tpg = &tl_hba->tl_hba_tpgs[sc->device->id];
ret = tcm_loop_issue_tmr(tl_tpg, tl_nexus, sc->device->lun,
- sc->tag, TMR_ABORT_TASK);
+ sc->request->tag, TMR_ABORT_TASK);
return (ret == TMR_FUNCTION_COMPLETE) ? SUCCESS : FAILED;
}

[Sagi Grimberg]

Post by Hannes Reinecke
The SCSI command tag is set to the tag assigned from the block
layer, not the SCSI-II tag message. So we need to convert
it into the correct SCSI-II tag message based on the
device flags, not the tag value itself.

Looks Good

Post by Hannes Reinecke
---
drivers/target/loopback/tcm_loop.c | 23 ++++++++---------------
1 file changed, 8 insertions(+), 15 deletions(-)
diff --git a/drivers/target/loopback/tcm_loop.c b/drivers/target/loopback/tcm_loop.c
index 340de9d..c2a9370 100644
--- a/drivers/target/loopback/tcm_loop.c
+++ b/drivers/target/loopback/tcm_loop.c
@@ -153,18 +153,11 @@ static int tcm_loop_change_queue_type(struct scsi_device *sdev, int tag)
/*
* Locate the SAM Task Attr from struct scsi_cmnd *
*/
-static int tcm_loop_sam_attr(struct scsi_cmnd *sc)
-{
- if (sc->device->tagged_supported) {
- switch (sc->tag) {
- return MSG_HEAD_TAG;
- return MSG_ORDERED_TAG;
- break;
- }
- }
+static int tcm_loop_sam_attr(struct scsi_cmnd *sc, int tag)
+{
+ if (sc->device->tagged_supported &&
+ sc->device->ordered_tags && tag >= 0)
+ return MSG_ORDERED_TAG;
return MSG_SIMPLE_TAG;
}
@@ -227,7 +220,7 @@ static void tcm_loop_submission_work(struct work_struct *work)
rc = target_submit_cmd_map_sgls(se_cmd, tl_nexus->se_sess, sc->cmnd,
&tl_cmd->tl_sense_buf[0], tl_cmd->sc->device->lun,
- transfer_length, tcm_loop_sam_attr(sc),
+ transfer_length, tcm_loop_sam_attr(sc, tl_cmd->sc_cmd_tag),
sc->sc_data_direction, 0,
scsi_sglist(sc), scsi_sg_count(sc),
sgl_bidi, sgl_bidi_count,
@@ -266,7 +259,7 @@ static int tcm_loop_queuecommand(struct Scsi_Host *sh, struct scsi_cmnd *sc)
}
tl_cmd->sc = sc;
- tl_cmd->sc_cmd_tag = sc->tag;
+ tl_cmd->sc_cmd_tag = sc->request->tag;
INIT_WORK(&tl_cmd->work, tcm_loop_submission_work);
queue_work(tcm_loop_workqueue, &tl_cmd->work);
return 0;
@@ -370,7 +363,7 @@ static int tcm_loop_abort_task(struct scsi_cmnd *sc)
*/
tl_tpg = &tl_hba->tl_hba_tpgs[sc->device->id];
ret = tcm_loop_issue_tmr(tl_tpg, tl_nexus, sc->device->lun,
- sc->tag, TMR_ABORT_TASK);
+ sc->request->tag, TMR_ABORT_TASK);
return (ret == TMR_FUNCTION_COMPLETE) ? SUCCESS : FAILED;
}

--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to ***@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html

[Nicholas A. Bellinger]

Post by Hannes Reinecke
The SCSI command tag is set to the tag assigned from the block
layer, not the SCSI-II tag message. So we need to convert
it into the correct SCSI-II tag message based on the
device flags, not the tag value itself.
---
drivers/target/loopback/tcm_loop.c | 23 ++++++++---------------
1 file changed, 8 insertions(+), 15 deletions(-)
diff --git a/drivers/target/loopback/tcm_loop.c b/drivers/target/loopback/tcm_loop.c
index 340de9d..c2a9370 100644
--- a/drivers/target/loopback/tcm_loop.c
+++ b/drivers/target/loopback/tcm_loop.c
@@ -153,18 +153,11 @@ static int tcm_loop_change_queue_type(struct scsi_device *sdev, int tag)
/*
* Locate the SAM Task Attr from struct scsi_cmnd *
*/
-static int tcm_loop_sam_attr(struct scsi_cmnd *sc)
-{
- if (sc->device->tagged_supported) {
- switch (sc->tag) {
- return MSG_HEAD_TAG;
- return MSG_ORDERED_TAG;
- break;
- }
- }
+static int tcm_loop_sam_attr(struct scsi_cmnd *sc, int tag)
+{
+ if (sc->device->tagged_supported &&
+ sc->device->ordered_tags && tag >= 0)
+ return MSG_ORDERED_TAG;
return MSG_SIMPLE_TAG;
}
@@ -227,7 +220,7 @@ static void tcm_loop_submission_work(struct work_struct *work)
rc = target_submit_cmd_map_sgls(se_cmd, tl_nexus->se_sess, sc->cmnd,
&tl_cmd->tl_sense_buf[0], tl_cmd->sc->device->lun,
- transfer_length, tcm_loop_sam_attr(sc),
+ transfer_length, tcm_loop_sam_attr(sc, tl_cmd->sc_cmd_tag),
sc->sc_data_direction, 0,
scsi_sglist(sc), scsi_sg_count(sc),
sgl_bidi, sgl_bidi_count,
@@ -266,7 +259,7 @@ static int tcm_loop_queuecommand(struct Scsi_Host *sh, struct scsi_cmnd *sc)
}
tl_cmd->sc = sc;
- tl_cmd->sc_cmd_tag = sc->tag;
+ tl_cmd->sc_cmd_tag = sc->request->tag;
INIT_WORK(&tl_cmd->work, tcm_loop_submission_work);
queue_work(tcm_loop_workqueue, &tl_cmd->work);
return 0;
@@ -370,7 +363,7 @@ static int tcm_loop_abort_task(struct scsi_cmnd *sc)
*/
tl_tpg = &tl_hba->tl_hba_tpgs[sc->device->id];
ret = tcm_loop_issue_tmr(tl_tpg, tl_nexus, sc->device->lun,
- sc->tag, TMR_ABORT_TASK);
+ sc->request->tag, TMR_ABORT_TASK);
return (ret == TMR_FUNCTION_COMPLETE) ? SUCCESS : FAILED;
}

Applied. Thanks Hannes!

--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to ***@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html